.

I&P Lifting Gear Ltd
237 Scotia Road, Tunstall, Stoke-On-Trent, Staffordshire ST6 4PS
Telephone: 01782 814411 Fax: 01782 575510

FAIL (the browser should render some flash content, not this).

NEWS CATEGORIES

NEWS ARCHIVES

STOCKISTS OF

LIFTING EQUIPMENT

View our product range

RUD Components, Hand Chain Blocks, Lever Hoists, Hand Pallet Trucks, Electric Hoists, Chain Slings and more...

SAFETY AT HEIGHT

View our product range

Vertical Fall Protection, Horizontal Fall Protection, Personal Fall Protection Equipment and more...

Cylinders & Pumps

pumpset SC-Series, Single-Acting Cylinder-Pump Sets

The Quickest and Easiest Way to Start Working Right Away

  • Optimum match of individual components
  • All sets are ready-for-use
  • Sets include 1,8 m safety hose and gauge with gauge adaptor
  • All hand pumps are two-speed
Technical Data

Cylinder Selection
 SetCap

 CylinderModel

Number

 Stroke Coll.Height

 Pump Selection
hand pump hand pump hand pump foot pump turbo air pump
ton (kN) mm mm
P-142 P-392 P-80 P-392FP PATG-1102N
RC seriessingle-acting

general purpose

cylinders

 5 (45) RC-55 127 215 SCR-55H – – – –
10 (101) RC-102 54 121 – SCR-102H – SCR-102FP SCR-102A
RC-106 156 247 – SCR-106H – SCR-106FP SCR-106A
RC-1010 257 349 – SCR-1010H – SCR-1010FP SCR-1010A
15 (142) RC-154 101 200 – SCR-154H – SCR-154FP SCR-154A
RC-156 152 271 – SCR-156H – SCR-156FP SCR-156A
25 (232) RC-252 50 165 – SCR-252H – SCR-252FP SCR-252A
RC-254 102 215 – SCR-254H – SCR-254FP SCR-254A
RC-256 158 273 – SCR-256H – SCR-256FP SCR-256A
RC-2514 362 476 – – SCR-2514H – SCR-2514A
50 (498) RC-506 159 282 – SCR-506H SCR-506H – SCR-506A
RCS seriessingle-acting

low height

cylinders

 10 (101) RCS-101 38 88 – SCL-101H – SCL-101FP SCL-101A
20 (201) RCS-201 45 98 – SCL-201H – SCL-201FP SCL-201A
30 (295) RCS-302 62 117 – SCL-302H – SCL-302FP SCL-302A
45 (435) RCS-502 60 122 – SCL-502H – SCL-502FP SCL-502A
90 (887) RCS-1002 57 141 – SCL-1002H – – –
RCH seriessingle-acting

hollow cylinders

 13 (125) RCH-121 42 120 SCH-121H – – – –
20 (215) RCH-202 49 162 – SCH-202H – SCH-202FP SCH-202A
30 (326) RCH-302 64 178 – SCH-302H – SCH-302FP SCH-302A
60 (576) RCH-603 76 247 – – SCH-603H – SCH-603A
95 (933) RCH-1003 76 254 – – SCH-1003H – –
BRP seriespull cylinders

 10 (105) BRP-106C 151 587 – SCP-106CH – SCP-106CFP –
BRP-106L 151 541 – SCP-106LH – SCP-106LFP –
30 (326) – - - – – – – –
BRP-306 155 1085 – – SCP-306H – –
50(505) BRP-606 152 719 – – SCP-606H – –
general Single-Acting, General Purpose Cylinders

  • Collar threads, plunger threads and base mounting holes enable easy fixturing on most models
  • Designed for use in all positions
  • Removable strap handles for unobstructed fixturing on RC-5013, RC-7513 and both 100 ton models
  • High strength alloy steel for durability
  • Baked enamel finish for increased corrosion resistance
  • Plunger wiper reduces contamination, extending cylinder life
Technical Data

Cylinder Capacity Stroke Model Number Cylinder
Effective Area		 Oil Capacity Coll. Height Weight
ton (kN) mm cm2 cm3 mm kg
5(45) 16 RC-50 6,5 10 41 1
25 RC-51 6,5 16 110 1
76 RC-53 6,5 50 165 1,5
127 RC-55 6,5 83 215 1,9
177 RC-57 6,5 115 273 2,4
232 RC-59 6,5 151 323 2,8
10(101) 26 RC-101 14,5 38 89 1,8
54 RC-102 14,5 78 121 2,3
105 RC-104 14,5 152 171 3,3
156 RC-106 14,5 226 247 4,4
203 RC-108 14,5 294 298 5,4
257 RC-1010 14,5 373 349 6,4
304 RC-1012 14,5 441 400 6,8
356 RC-1014 14,5 516 450 8,2
15(142) 25 RC-151 20,3 51 124 3,3
51 RC-152 20,3 104 149 4,1
101 RC-154 20,3 205 200 5
152 RC-156 20,3 308 271 6,8
203 RC-158 20,3 411 322 8,2
254 RC-1510 20,3 516 373 9,5
305 RC-1512 20,3 619 423 10,9
356 RC-1514 20,3 723 474 11,8
25(232) 26 RC-251 33,2 86 139 5,9
50 RC-252 33,2 166 165 6,4
102 RC-254 33,2 339 215 8,2
158 RC-256 33,2 525 273 10
210 RC-258 33,2 697 323 12,2
261 RC-2510 33,2 867 374 14,1
311 RC-2512 33,2 1033 425 16,3
362 RC-2514 33,2 1202 476 17,7
30(295) 209 RC-308 42,1 880 387 18,1
50(498) 51 RC-502 71,2 362 176 15
101 RC-504 71,2 719 227 19,1
159 RC-506 71,2 1131 282 23,1
337 RC-5013 71,2 2399 460 37,6
75 (718) 156 RC-756 102,6 1601 285 29,5
333 RC-7513 102,6 3417 492 59
95 (933) 168 RC-1006 133,3 2239 357 59
260 RC-10010 133,3 3466 449 72,6
low_height RSM, RCS series Low Height Cylinders

RSM-series, Flat-Jac® Cylinders

  • Compact, flat design for use where other cylinders will not fit
  • RSM-750, 1000 and 1500 have handle for easy carrying
  • Mounting holes permit easy fixturing
  • Baked enamel finish for increased corrosion resistance
  • Hard chrome plated high quality steel plungers
  • Grooved plunger ends require no saddle
  • Single-acting, spring return

RSM-series, Flat-Jac® Cylinders

  • Compact, flat design for use where other cylinders will not fit
  • RSM-750, 1000 and 1500 have handle for easy carrying
  • Mounting holes permit easy fixturing
  • Baked enamel finish for increased corrosion resistance
  • Hard chrome plated high quality steel plungers
  • Grooved plunger ends require no saddle
  • Single-acting, spring return
Technical Data

Cylinder
Capacity		 Stroke Model Number Cylinder
Effective Area		 Oil Capacity Coll. Height Ext.
height		 Outside
Dia.		 Weight
ton (kN) mm cm2 cm3 mm mm mm kg
5 (45) 6 RSM-50 6,5 4 32 38 58 x 41 1
10 (101) 12 RSM-100 14,5 18 43 54 82 x 55 1,4
20 (201) 11 RSM-200 28,7 32 51 62 101 x 76 3,1
30(295) 13 RSM-300 42,1 55 58 71 117 x 95 4,5
45 (435) 16 RSM-500 62,1 99 66 82 139 x 114 6,8
75 (718) 16 RSM-750 102,6 164 79 95 165 x 139 11,3
90 (887) 16 RSM-1000 126,7 203 85 101 177 x 152 14,5
150(1368) 16 RSM-1500 198,1 317 100 116 215 x 190 26,3
10 (101) 38 RCS-101 14,5 55 88 126 69 4,1
20 (201) 45 RCS-201 28,7 129 98 143 92 5
30 (295) 62 RCS-302 42,1 261 117 179 101 6,8
45 (435) 60 RCS-502 62,1 373 122 182 124 10,9
90 (887) 57 RCS-1002 126,7 722 141 198 165 22,7
hollow_plunger RCH, series Hollow Plunger Cylinders

  • Hollow plunger design allows for both pull and push forces
  • Single-acting, spring return
  • Nickel-plated, floating center tube on models over 20 tons increases product life
  • Baked enamel finish for increased corrosion resistance
  • Collar threads for easy fixturing
Technical Data

Cylinder
Capacity		 Stroke Model Number Cylinder
Effective Area		 Oil Capacity Coll. Height Ext.
height		 Outside
Dia.		 Center Hole
Diameter		 Weight
ton (kN) mm cm2 cm3 mm mm mm mm kg
13 (125) 8 RCH-120 17,9 14 55 63 69 19,6 1,5
42 RCH-121 17,9 75 120 162 69 19,6 2,8
42 RCH-1211 17,9 75 120 162 69 19,6 2,8
76 RCH-123 17,9 136 184 260 69 19,6 4,4
20 (215) 49 RCH-202 30,7 150 162 211 98 26,9 7,7
155 RCH-206 30,7 476 306 461 98 26,9 14,1
30 (326) 64 RCH-302 46,6 298 178 242 114 33,3 10,9
155 RCH-306 46,6 722 330 485 114 33,3 21,8
60 (576) 76 RCH-603 82,3 626 247 323 159 53,8 28,1
153 RCH-606 82,3 1259 323 476 159 53,8 35,4
95 (931) 76 RCH-1003 133 1011 254 330 212 79,0 63
lightweight P series Lightweight Hand Pumps

  • Lightweight and compact design
  • Durable glass-filled nylon reservoir and nylon encapsulated aluminium pump base
  • Two-speed operation to reduce handle strokes
  • Integral 4-way valve on P-842 for operation of double-acting cylinders
  • Large oil capacities to power a wide variety of cylinders and tools
  • Internal pressure relief valve for overload protection
Technical Data

Pump
Typex		 Usable
Oil
Capacity		 Model
Number		 Pressure
Rating		 Oil Displacement/Stroke Max.
Handle
Effort		 Piston
Stroke		 Weight
bar cm3
cm3 1st stage 2nd stage 1st stage 2nd stage kg mm kg
Single-
Speed		 327 P-141 - 700 - 0,90 32,7 12,7 2,0
901 P-391 - 700 - 2,47 38,6 25,4 4,1
Two-
Speed		 327 P-142 13 700 3,62 0,90 35,4 12,7 2,0
901 P-202 13 700 3,62 0,90 28,6 12,7 3,4
901 P-392 13 700 11,26 2,47 42,2 25,4 4,1
2540 P-802 27 700 39,33 2,47 43,1 25,4 8,2
2540 P-842 27 700 39,33 2,47 43,1 25,4 10,0
steel P series Steel Hand Pumps

  • Two-speed operation for reduced operator fatigue (except P-39)
  • 4-way valving on the P-84 and P-464 for operation of double-acting cylinders
  • External load release valve on remaining models for single-acting cylinder operation
  • Internal pressure relief valves for overload protection
  • Large oil capacities to power a wide range of cylinders or tools
Technical Data

Pump
Type		 Usable
Oil
Capacity		 Model
Number		 Pressure
Rating**		 Oil Displacement/Stroke Max.
Handle
Effort		 Piston
Stroke		 Weight
bar cm3
cm3 1st stage 2nd stage 1st stage 2nd stage kg mm kg
Single-
Speed		 655 P- 39 - 700 - 2,62 50 20,6 5,9
Two-
Speed		 770 P-77 14 700 16,00 2,41 43 25,4 6,8
2200 P- 80 25 700 16,22 2,46 47 25,4 10,9
4080 P- 801 25 700 16,22 2,46 47 25,4 14,1
2200 P- 84 25 700 16,22 2,46 47 25,4 13,2
7423 P- 462 14 700 126,2 4,75 49 38,1 27,7
7423 P- 464 14 700 126,2 4,75 49 38,1 27,7
hoses 700 series High Pressure Hydraulic Hoses

  • For demanding applications, featuring a 4:1 design factor
  • Maximum working pressure of 700 bar
  • Four layer design, including two high strength steel wire braids
  • Outside jacket is polyurethane to provide maxium abrasion resistance
  • Exhibits low volumetric expansion under pressure to enhance overall system efficiency
  • Crimped-on rubber strain relief for improved life and durability on all models
Technical Data

Internal
Diameter		 Hose End Assemblies and Couplers Hose Length Model
Number		 Weight
mm End one End two m kg
6,4 3/8” NPT 3/8” NPT 0,6 H-7202 0,5
0,9 H-7203 0,7
1,8 H-7206 0,9
3 H-7210 1,4
6,1 H-7220 2,8
A-604 1,8 HA-7206B 1,1
CH-604 0,9 HC-7203 0,8
1,8 HC-7206 1
3 HC-7210 1,5
9,7 3/8” NPT 3/8” NPT 3 H-7310 2,4
© Copyright I&P Lifting Gear
Website design and hosting by ego